<<<>Highpath Engineeringprinter
A4 scale = 70%

 

Crank Shortening Service

We can shorten most solid aluminium cranks by reshaping their ends and then drilling, tapping and facing new pedal holes. Special jigs ensure that these are accurate so that your pedals will run true.

shorten

By how much? Cranks can be shortened by 20mm or more.
See our Cycle Transmission Notes for crank length recommendations.
OptionsCranks can be threaded left or right, for normal (9/16") or junior (1/2") pedals.
Cranks can also be reverse-threaded for tandem cross-over drives.
Extra holesExtra holes would give you a choice of pedal positions. However we will only do
this if your cranks are wide enough and you agree to indemnify us against
breakage. We recommend using Pulse Crank Shorteners instead.
Not possible...We regret that hollow cranks, steel cranks, carbon cranks and cranks narrower
than 25mm at the new pedal position can't be shortened.
Prices
 £approx
euro		approx
US$
to shorten a pair of cranks
to shorten one crank
    + each extra pedal hole		39.50
24.50
+ 5.00		59.00
37.00
+ 8.00		80.00
50.00
+ 10.00
How to send your cranks
  1. Remove the chainrings and clean your cranks  (otherwise please add £5.00 to your payment).
  2. Attach a label to each crank with your name on it, and wrap them carefully.
  3. Complete an order form, giving instructions and a daytime phone number or email address.

 

 
© Chris Bell, 2007		next page...  >
HIGHPATH ENGINEERING
Cornant, Cribyn, Lampeter, Ceredigion, SA48 7QW, Wales, UK
phone / fax:  +44 (0)1570 470035  (UK office hours only)
email:   write us an email 		   Wales